激光束安全（联锁）快门
X射线安全（联锁）快门
Large Aperture LASER SAFETY (Interlock) SHUTTERS / X-RAY SHUTTERS:
DESCRIPTION:
The SH-20 laser safety shutter consists of two SH-10 laser safety shutters based on a single mount going the opposite directions to make a large aperture. Each shutter consists of a blade mounted on a rotary solenoid.
When the shutter is powered, the blades move to an "ON" position and clear the path for the laser beam. When the power is turned off, the return springs of the shutters move the blades to an "OFF" position to block the laser beam. THE SHUTTER IS IN THE "CLOSE" POSITION WHEN THERE IS NO CURRENT.
The standard blade material is 0.02" thick anodized aluminum. To meet laser specifications and for other uses like X-ray other materials and thickness are used.
We offer standard and custom shutters.
SPECIFICATIONS for the standard SH-20 laser safety shutter:
APERTURE SIZE: 1.0 inch
OPERATING VOLTAGES:
For the 5V laser safety shutter: 5V dc, 1400 mA.
For the 12V laser safety shutter: 12V dc, 600 mA.
For the 24V laser safety shutter: 24V dc, 320 mA.
RESPONSE TIME: 15 mSec
RETURN SPRING TORQUE: 0.0055 to 0.009 Nm
EXPECTED LIFE:
SH-20: 2 million cycles minimum
SH-20-L: 50 million cycles minimum
SHUTTER DIMENSIONS: 2.8"W x 3.2"L x 2"D (2.8"W x 3.4"L x 2.1"D boxed)
SHUTTER WEIGHT: 150 grams
MAX. OPERATING TEMPERATURE: 75 deg C
SH-20选型表：
We offer the following models (custom and standard) for the SH-20 laser safety shutter:
SH-20 shutter comes with a mounting plate that allows horizontal or vertical mounting, 2 million cycles minimum.
SH-20-L shutter comes with a mounting plate that allows horizontal or vertical mounting, 50 million cycles minimum.
SH-20-B shutter is boxed with a 1" dia through hole for laser light, 2 million cycles minimum. Horizontal or vertical mounting optional.
SH-20-B-L shutter is boxed with a 1" dia through hole for laser light, 50 million cycles minimum. Horizontal or vertical mounting optional.
SH-20-PI shutter has position indicators to indicate the position of each blade to verify the status of the shutter (open or close). Each blade has two magnetic switches that work together as one switch (they are connected in series). When the blades are in the "CLOSE" position one pair of the magnetic switches is close and the other pair is open. When the blades move to the "OPEN" position the close switches open and the open switches close. A three pin MOLEX connector (P/N 22-03-2031) is used for the output of the position indicator.
2 million cycles minimum. Horizontal or vertical mounting optional.
SH-20-PI-L shutter has position indicators to indicate the position of each blade to verify the status of the shutter (open or close). Each blade has two magnetic switches that work together as one switch (they are connected in series). When the blades are in the "CLOSE" position one pair of the magnetic switches is close and the other pair is open. When the blades move to the "OPEN" position the close switches open and the open switches close. A three pin MOLEX connector (P/N 22-03-2031) is used for the output of the position indicator.
50 million cycles minimum. Horizontal or vertical mounting optional.
SH-20-PI-B shutter has position indicators to indicate the position of each blade to verify the status of the shutter (open or close). Each blade has two magnetic switches that work together as one switch (they are connected in series). When the blades are in the "CLOSE" position one pair of the magnetic switches is close and the other pair is open. When the blades move to the "OPEN" position the close switches open and the open switches close. A three pin MOLEX connector (P/N 22-03-2031) is used for the output of the position indicator.
The shutter is boxed, with a 1" dia through hole for laser light. 2 million cycles minimum. Horizontal or vertical mounting optional.
SH-20-PI-B-L shutter has position indicators to indicate the position of each blade to verify the status of the shutter (open or close). Each blade has two magnetic switches that work together as one switch (they are connected in series). When the blades are in the "CLOSE" position one pair of the magnetic switches is close and the other pair is open. When the blades move to the "OPEN" position the close switches open and the open switches close. A three pin MOLEX connector (P/N 22-03-2031) is used for the output of the position indicator.
The shutter is boxed, with a 1" dia through hole for laser light. 50 million cycles minimum. Horizontal or vertical mounting optional.
L= Long life: 50 million cycles min.
B= The shutter is boxed, with a 1" dia through hole for laser light
PI= Shutter has position indicator to verify the status of the shutter (open or close)
Damage threshold: The standard blades of the SH-20 shutter is 0.02 inch thick black anodized aluminum, which withstands 100 mW/mm.sq. with a limit of 2 Watts of total power. We also offer solutions that meet laser specifications, different wavelengths and more powerful laser beams. We offer a veriety of materials and thicknesses suitable for laser light, X-Ray and plasma, from VIS to FIR applications.
Please call to discuss your specific application.
You can also indicate the most suitable material for your application and supply your own mirrors, gratings or other attachments.
The standard blade material for the SH-20 is 0.02 inch thick black anodized aluminum.
We also offer the following blades solutions:
- Bare aluminum blades
- 1mm thick aluminum blades
- 3mm (1/8 inch) thick aluminum blades
- Clear anodized blades
- Reflective blades, polished Nickel plating. You need to absorb the reflected beam with a beam dump.
- Tantalum blades (recommended for X-RAY)
- Gold plated blades. You need to absorb the reflected beam with a beam dump.
- Mirrors, enhanced aluminum coated, epoxied onto the blades. You need to absorb the reflected beam with a beam dump.
- Mirrors, gold coated, epoxied onto the blades. You need to absorb the reflected beam with a beam dump.
- Mirror, silver coated, epoxied onto the blades. You need to absorb the reflected beam with a beam dump.
